RIIWHS204E - Work Safely at Heights

RIIWHS204E- Work Safely at Heights

This unit describes the skills and knowledge required to work safely at heights in the resources and infrastructure industries.
It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.

ENROL

Delivery

Face-to-face

Cost

$450

Duration

2-3 days

Funding Available

IPS Payment Plans
Construction Skills Queensland (CSQ)

Industry Jobs

course outcome

Earning Potential

course salary potential

Health and Safety Ticket- Work Safely at Heights

In this course you will learn the skills to:

  • Identify work requirements
  • Identify work procedures and instructions
  • Access and install equipment
  • Perform work at heights
  • Clean up work area

Course Information

Duration

Individuals undertaking this unit of competency as a self-paced learning may take 2-3 days

Delivery Method 

Face to face

Recognition of prior learning (RPL)

RPL not available

Entry Requirements

Literacy and Numeracy (LLN) level 3

White card

ENROL

Funding Available

IPS Payment Plans (Upfront Costs) 

Construction Skills Queensland (CSQ)

ENROL

More Information

Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.

Note: The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented RTOs are advised to contextualise the unit of competency by referring to the existing State/Territory OHS legislative requirements.

ENROL

Student Success with IPS Institute


RIIWHS202E - Enter and Work in Confined Spaces

RIIWHS202E- Enter and Work in Confined Spaces

This unit describes the skills and knowledge required to enter and work in confined spaces in the resources and infrastructure industries.
It applies to those working in operational roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures and take responsibility for the quality of work outcomes.

ENROL

Delivery

Face-to-face

Cost

$450

Duration

2-3 days

Funding Available

IPS Payment Plans
Construction Skills Queensland (CSQ)

Industry Jobs

course outcome

Earning Potential

course salary potential

Health and Safety Ticket- Enter and Work in Confined Spaces

In this course you will learn the skills to:

  • Plan and prepare for working in confined space
  • Work in confined space
  • Exit confined space
  • Clean up

Course Information

Duration

Individuals undertaking this unit of competency as a self-paced learning may take 2-3 days

Delivery Method 

Face to face

Recognition of prior learning (RPL)

RPL not available

Entry Requirements

Literacy and Numeracy (LLN) level 3

White card

ENROL

Funding Available

IPS Payment Plans (Upfront Costs) 

Construction Skills Queensland (CSQ)

ENROL

More Information

Licensing, legislative and certification requirements that apply to this unit can vary between states, territories and industry sectors. Users must check requirements with relevant body before applying the unit.

Note: The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented RTOs are advised to contextualise the unit of competency by referring to the existing State/Territory OHS legislative requirements.

ENROL

Student Success with IPS Institute


RIIWHS302E - Implement Traffic Management Plans

RIIWHS302E- Implement Traffic Management Plans

This unit describes the skills and knowledge required to set out, monitor and close down traffic management plans and traffic guidance schemes in civil construction.
It applies to those working in supervisory roles. They generally work in teams in live traffic environments and hold some responsibility for the outcomes of others.

ENROL

Delivery

Face-to-face

Cost

Full course- $350

Refresher- $250

Duration

2-4 days

Funding Available

IPS Payment Plans
Construction Skills Queensland (CSQ)

Industry Jobs

course outcome

Earning Potential

course salary potential

Industry Ticket- Implement Traffic Management Plans

In this course you will learn the skills to:

  • Prepare to implement traffic management plan
  • Set out traffic guidance scheme
  • Monitor traffic guidance scheme
  • Close down work activities

Course Information

Duration

Individuals undertaking this unit of competency as a self-paced learning may take 2-3 days plus vocational placement.

Delivery Method 

Face to face

Recognition of prior learning (RPL)

RPL not available

Entry Requirements

Literacy and Numeracy (LLN) level 3

White card

ENROL

Funding Available

IPS Payment Plans (Upfront Costs)

Construction Skills Queensland (CSQ)

ENROL

More Information

Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.

Note: The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented registered training organisations are advised to contextualise the unit of competency by referring to the existing state/territory OHS legislative requirements.

ENROL

Student Success with IPS Institute

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.


RIIWHS2025E - Control Traffic With Stop-Slow Bat

RIIWHS205E- Control Traffic with Stop-Slow Bat

This unit describes the skills and knowledge required to control vehicle and pedestrian traffic using stop-slow bats, hand signals and approved communication devices in the resources and infrastructure industries.
It applies to those working in operational roles. They generally work in teams in live traffic environments under some degree of supervision.

ENROL

Delivery

Face-to-face

Cost

Full course- $350

Refresher- $250

Duration

2-4 days

Funding Available

IPS Payment Plans
Construction Skills Queensland

Industry Jobs

course outcome

Earning Potential

course salary potential

Industry Ticket- Control Traffic with Stop-Slow Bat

In this course you will learn the skills to:

  • Prepare to control traffic
  • Control traffic and operate communication devices
  • Conduct housekeeping activities

Course Information

Duration

Individuals undertaking this unit of competency as a self-paced learning may take 2 days with 20 hours placement.

Delivery Method 

Face to face

Recognition of prior learning (RPL)

RPL not available

Entry Requirements

Literacy and Numeracy (LLN) level 3

White card

ENROL

Funding Available

IPS Payment Plans (Upfront Costs)

Construction Skills Queensland (CSQ)

ENROL

More Information

The terms Occupational Health and Safety (OHS) and Work Health and Safety (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented registered training organisations are advised to contextualise the unit of competency by referring to the existing state/territory OHS legislative requirements

ENROL

Student Success with IPS Institute


CPCCWHS1001 - Prepare To Work Safely In The Construction Industry

CPCCWHS1001- Prepare to Work Safely in the Construction Industry

This unit of competency specifies the mandatory work health and safety training required prior to undertaking construction work. The unit requires the person to demonstrate personal awareness and knowledge of health and safety legislative requirements in order to work safely and prevent injury or harm to self and others. It covers identifying and orally reporting common construction hazards, understanding basic risk control measures, and identifying procedures for responding to potential incidents and emergencies. It also covers correctly selecting and fitting common personal protective equipment (PPE) used for construction work.

ENROL

Delivery

Face-to-face

Cost

$49

Duration

1 day

Funding Available

IPS Payment Plans

Industry Jobs

course outcome

Earning Potential

course salary potential

Industry Ticket- Prepare to Work Safely in the Construction Industry

This unit meets the general construction induction training requirements of:
Part 1.1 Definitions and Part 6.5 of the Model Work Health and Safety Regulations;
Division 11 of Part 3 of the Occupational Safety and Health Regulations 1996 for Western Australia; and
Division 3 of Part 5.1 of the Occupational Health and Safety Regulations 2007 for Victoria.
It is expected that site-specific induction training will be conducted prior to conducting construction work.

In this course you will learn the skills to:

  • Identify health and safety legislative requirements of construction work
  • Identify construction hazards and risk control measures
  • Identify health and safety communication and reporting processes
  • Identify incident and emergency response procedures

Course Information

Duration

Individuals undertaking this unit of competency as a self-paced learning may take 1 day.

Delivery Method 

Face to face

Recognition of prior learning (RPL)

RPL not available

Entry Requirements

Literacy and Numeracy (LLN) level 3

ENROL

Funding Available

IPS Payment Plans (Upfront Costs)

ENROL

More Information

Licensing, legislative, regulatory or certification requirements apply to this unit. Relevant work health and safety state and territory regulatory authorities should be consulted to confirm jurisdictional requirements.

ENROL

Student Success with IPS Institute


RIIMPO338E - Conduct Rigid Haul Truck Operations

RIIMPO338E- Conduct Rigid Haul Truck Operations

This unit describes the skills and knowledge required to operate, load, haul and dump materials using a rigid haul truck.
This unit applies to those who work in operational roles.

ENROL

Delivery

Face-to-face

Cost

$450

Duration

2-3 days

Funding Available

Construction Skills Queensland (CSQ)

Industry Jobs

course outcome

Earning Potential

course salary potential

Machinery Ticket- Conduct Rigid Haul Truck Operations

In this course you will learn to:

  • Plan and prepare for rigid haul truck operations
  • Operate rigid haul truck in line with established requirements
  • Load, haul and dump materials to complete work activity
  • Conduct housekeeping activities

Course Information

Duration

Individuals undertaking this unit of competency as a self-paced learning may take 2-3 days

Delivery Method 

Face to face

Recognition of prior learning (RPL)

RPL not available

Entry Requirements

Literacy and Numeracy (LLN) level 3

White card

ENROL

Funding Available

IPS Payment Plans (Upfront Costs) 

Construction Skills Queensland (CSQ)

ENROL

More Information

Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.

ENROL

Student Success with IPS Institute


RIIMPO337E - Conduct Articulated Haul Truck Operations

RIIMPO337E- Conduct Articulated Haul Truck Operations

his unit describes the skills and knowledge required to operate, load, haul and dump materials using an articulated haul truck.
This unit applies to those who work in operational roles.
This unit applies to both front and rear dumping haul trucks.

ENROL

Delivery

Face-to-face

Cost

$450

Duration

2-3 days

Funding Available

Construction Skills Queensland (CSQ)

Industry Jobs

course outcome

Earning Potential

course salary potential

Machinery Ticket- Conduct Articulated Haul Truck Operations

In this course you will learn the skills to:

  • Plan and prepare for articulated haul operations
  • Operate articulated haul truck in line with established requirements
  • Load, haul and dump materials to complete work activity
  • Conduct housekeeping activities

Course Information

Duration

Individuals undertaking this unit of competency as a self-paced learning may take 2-3 days

Delivery Method 

Face to face

Recognition of prior learning (RPL)

RPL not available

Entry Requirements

Literacy and Numeracy (LLN) level 3

White card

ENROL

Funding Available

IPS Payment Plans (Upfront Costs) 

Construction Skills Queensland (CSQ)

ENROL

More Information

Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.

ENROL

Student Success with IPS Institute


RIIMPO326E - Conduct Water Vehicle Operations

RIIMPO326E- Conduct Water Vehicle Operations

This unit describes the skills and knowledge required to load, haul and distribute water using a water vehicle.

ENROL

Delivery

Face-to-face

Cost

$450

Duration

2-3 days

Funding Available

Construction Skills Queensland (CSQ)

Industry Jobs

course outcome

Earning Potential

course salary potential

Machinery Ticket- Conduct Water Vehicle Operations

In this course you will learn the skills to:

  • Plan and prepare for water vehicle operations
  • Operate water vehicle in line with established requirements
  • Load, haul and distribute water to complete work activity
  • Conduct housekeeping activities

Course Information

Duration

Individuals undertaking this unit of competency as a self-paced learning may take 2-3 days

Delivery Method 

Face to face

Recognition of prior learning (RPL)

RPL not available

Entry Requirements

Literacy and Numeracy (LLN) level 3

White card

ENROL

Funding Available

IPS Payment Plans (Upfront Costs) 

Construction Skills Queensland (CSQ)

ENROL

More Information

Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.

ENROL

Student Success with IPS Institute


RIIMPO325E - Conduct Civil Construction Scraper Operations

RIIMPO325E- Conduct Civil Construction Scraper Operations

This unit describes the skills and knowledge required to operate a scraper to load, transport and discharge material, and to couple and relocate a scraper.
This unit applies to those working in site based roles.

ENROL

Delivery

Face-to-face

Cost

$450

Duration

2-3 days

Funding Available

Construction Skills Queensland (CSQ)

Industry Jobs

course outcome

Earning Potential

course salary potential

Machinery Ticket- Conduct Civil Construction Scraper Operations

In this course you will learn the skills to:

  • Plan and prepare for scraper operations
  • Operate scraper in line with established requirements to complete work activity
  • Couple machines to perform work activity
  • Relocate the scraper
  • Conduct housekeeping activities

Course Information

Duration

Individuals undertaking this unit of competency as a self-paced learning may take 2-3 days

Delivery Method 

Face to face

Recognition of prior learning (RPL)

RPL not available

Entry Requirements

Literacy and Numeracy (LLN) level 3

White card

ENROL

Funding Available

IPS Payment Plans (Upfront Costs) 

Construction Skills Queensland (CSQ)

ENROL

More Information

Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.

This unit alone does not provide sufficient skill to independently load and unload equipment. To perform this activity safely, personnel must either complete or be assisting someone who has completed RIIHAN308F Load and unload plant or equivalent.

ENROL

Student Success with IPS Institute


RIIMPO323E - Conduct Civil Construction Dozer Operations

RIIMPO323E- Conduct Civil Construction Dozer Operations

This unit describes the skills and knowledge required to conduct dozer operations.
This unit applies to those working in site based roles.

ENROL

Delivery

Face-to-face

Cost

$450

Duration

2-3 days

Funding Available

Construction Skills Queensland (CSQ)

Industry Jobs

course outcome

Earning Potential

course salary potential

Machinery Ticket- Conduct Civil Construction Dozer Operations

In this course you will learn the skills to:

  • Plan and prepare for dozer operations
  • Operate dozer in line with established requirements to complete work plan
  • Select, remove, fit and use attachments for a dozer
  • Relocate the dozer
  • Conduct housekeeping activities

Course Information

Duration

Individuals undertaking this unit of competency as a self-paced learning may take 2-3 days

Delivery Method 

Face to face

Recognition of prior learning (RPL)

RPL not available

Entry Requirements

Literacy and Numeracy (LLN) level 3

White card

ENROL

Funding Available

IPS Payment Plans (Upfront Costs) 

Construction Skills Queensland (CSQ)

ENROL

More Information

Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.

This unit alone does not provide sufficient skill to independently load and unload equipment. To perform this activity safely, personnel must either complete or be assisting someone who has completed RIIHAN308F Load and unload plant or equivalent.

ENROL

Student Success with IPS Institute